Use Cat5e cable to extend VGA and Data signal up to 300M
VDE-300 Touch Screen Extender via Cat5e

VDE-300T
VDE-300R
DB9 Female VDE Cable	DB9 Male VDE Cable

Introduction

VDE-300 is an extension system to transmit Touch Screen signal (VGA + Data) over Cat5e cable, it can reach the distance from 20M to 300M. It can simplify the installation and reaches a longer distance. Now, you can centralize PC servers in a secured place and extend the Touch Screen up to 300M to fulfill multi-purpose application.

Featuress

1. Transmit high resolution VGA and Data signal over Cat5e cable and control remotely by Touch Screen.
   
2. Bidirectional serial RS-232 (Tx/Rx) control
   
3. Remote and local monitors can display simultaneously.
   
4. Extended distance from 20M to 300M over a single Cat5e cable.
   
5. Use Cat5 Enhance UTP cable (350MHz bandwidth) for best quality.
   
6. Software free, pure hardware design, support Plug & Play
   
7. Support VGA, SVGA, XGA, TFT_LCD with DDC2B function
   
8. Transmitter and Receiver build with four color LEDs to indicate system status
   
9. Transmitter VDE-300T:
   â€æ Built in one set of VGA(DB15) and Data(DB9) inputs
   â€æ Built in one set of VGA(DB15) output for monitoring
   â€æ Built in one RJ-45 port for system output which can be connected by UTP cable and send signal to one set of System Receiver
   
10. Receiver VDE-300R:
    â€æ Use different Distance Changer to exchange the signal from different range of distance supporting from 20 to 300 meters.
    â€æ Built in one set of VGA(DB15) and Data(DB9) output for Touch Screen
    â€æ Support following VGA resolution: 1280x1024x60Hz@300M, 1600x1200x60Hz@200M

Stack Three Layers of AV Extender through Cat5e to Reach more Displays

Specification